Kenwood TS-570D G HF Transceiver 160 - 10 Meters with Auto Tuner & 16 bit DSP
I have checked this radio on the air and all functions appear to be working as they should be with no obvious problems. The previous owner was an elderly man that used some white highlighter on some of the buttons which I was able to remove but there may be a little residue. The top cover has a little masking tape residue and some marker written near the back of the top cover to make it easy to see where the connections are.
The UP/DWN Hand microphone and power cord are included.
Digital Signal Processing technology is affordable to everyone with the Kenwood® TS-570DG. This advanced design provides 16-bit DSP technology for superb audio, noise reduction, equalization and slope tuning. The result is dramatic interference reduction not available in analog designs. The new NR1 noise reduction system is adjustable in 9 steps increments or can be assigned to track input signal strength automatically. Both the NR1 and NR2 settings now track when changing mode groups. In SSB/AM/FM modes you can select a Hi/Low cut DSP slope tune using up to 441 possible combinations. In CW and FSK the DSP acts as VBT (Variable band Tuning) that alters the passband width for rejection of nearby signals.
This radio covers the amateur bands from 160 through 10 meters and of course features a superior general coverage receiver. Power output can be set from 5 to 100 watts. A preset auto antenna tuner and electronic keyer are built in. The menu system offers 46 types of functions for Technician thru Extra. Full and semi break-in, dedicated packet port and 57600 bps PC control. Keypad entry, 100 memories, IF shift, large LCD, Scanning and CW Auto Tune round out the many features of this transceiver. The MC-43S hand mic is included. (Please note that only one optional filter may be added).