This RL Drake B-Line Main Tuning Knob Inlay, will fit all the Drake B-Line Receivers and Transmitters main tuning knob. (Non Spinner type)
Note: The Knob in the picture is for demonstration only and is not included!The early B-Line Radios have a main tuning knob with thicker ridges and those knobs have an inlay that is shaped like a cup.
My inlays are flat but will fit and install on the early knobs within the recessed area and will look like the original.Late model B-Line radios have the thinner ridges and do not have the cup shaped inlay (and no spinner finger hole)This inlay has a brushed aluminum finish just like the originals, and they have a plastic film on the face side which you have to remove before you install them.
It is very easy to install. You simply put a drop of contact cement in the middle of the back side of the insert and you can glue it on top of the old one, or you can remove the old scratched up insert with a pick.
To remove the old one you can drill a small hole in the middle of the old insert to remove it with a sharp tool so you do not damage the edges of the inset area.It makes such a difference to replace the scratched or dinged insert as they are a focal point of attention.