This RL Drake MN-2700 Tuner set of 2 Inlays for Tuning Knobs, will fit the two front panel knobs on this antenna tuner.
I do have single inlays available but with the shipping cost about the same, and the fact that the older inlays can become discolored, you are better off with the set of two.
This inlay has a brushed aluminum finish just like the originals, and they have a plastic film on the face side which you have to remove before you install them.
It is very easy to install. You simply put a drop of contact cement in the middle of the back side of the insert and you can glue it on top of the old one, or you can remove the old scratched up insert with a pick.
To remove the old one you can drill a small hole in the middle of the old insert to remove it with a sharp tool so you do not damage the edges of the inset area.It makes such a difference to replace the scratched or dinged insert as they are a focal point of attention.